[HPUX] HBA카드 WWN확인 하기
1. HW 패스 확인
hp-test:/# ioscan -kfnC fc Class I H/W Path Driver S/W State H/W Type Description ==================================================================== fc 0 0/3/0/0/0/0 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter /dev/fclp0 fc 1 0/3/0/0/0/1 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter /dev/fclp1 fc 2 0/7/0/0/0/0 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter /dev/fclp2 fc 3 0/7/0/0/0/1 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter /dev/fclp3 |
2. 해당 패스의 서버에 슬롯정보확인
hp-test:/# olrad -q Driver(s) Capable Slot Path Bus Max Spd Pwr Occu Susp OLAR OLD Max Mode Num Spd Mode 7 0/2/1 10 133 133 On Yes No Yes Yes PCI-X PCI-X 8 0/5/1 74 133 133 On Yes No Yes Yes PCI-X PCI-X 9 0/1/1 1 66 66 On Yes No Yes Yes PCI-X PCI-X 10 0/1/2 1 66 66 Off No N/A N/A N/A PCI-X PCI-X PCI-Express Slots Information ----------------------------- Driver(s) Capable Slot Path Link Max Max Link Pwr Occu Susp OLAR OLD Mode Spd Link Link Width Spd Width 3 0/6/0/0/0/0/4/0/0 2.5 2.5 x8 x8 Off No N/A N/A N/A PCIe 4 0/6/0/0/0/0/2/0/0 2.5 2.5 x8 x8 Off No N/A N/A N/A PCIe 5 0/7/0/0/0 2.5 2.5 x8 x4 On Yes No Yes Yes PCIe 6 0/3/0/0/0 2.5 2.5 x8 x4 On Yes No Yes Yes PCIe
|
3. 해당포트의 WWN확인
: HBA카드가 2포트인 경우 Node Name과 Port Name이 다르며, 1포트인 경우 Node Name과 Port Name이 동일하다고 합니다. 따라서 일반적으로 WWN을 사용할경우 World Wide Port Name을 사용하면 됩니다.
hp-test:/# fcmsutil /dev/fclp0 Vendor ID is = 0x10df Device ID is = 0xfe00 PCI Sub-system Vendor ID is = 0x103c PCI Sub-system ID is = 0x7049 Chip version = 2 Firmware Version = 2.70X5 SLI-3 (Z3F2.70X5) EFI Version = ZE3.21A3 EFI Boot = ENABLED Driver-Firmware Dump Available = NO Driver-Firmware Dump Timestamp = N/A Topology = PTTOPT_FABRIC Link Speed = 2Gb Local N_Port_id is = 0x620413 Previous N_Port_id is = 0x620413 N_Port Node World Wide Name = 0x5001438011001a51 N_Port Port World Wide Name = 0x5001438011001a50 -> WWN Switch Port World Wide Name = 0x200408008844c200 Switch Node World Wide Name = 0x100008008844c200 Driver state = ONLINE - > 드라이버 상태확인 online 이어야 사용중임 Hardware Path is = 0/3/0/0/0/0 Maximum Frame Size = 2048 Driver Version = @(#) FCLP: PCIe Fibre Channel driver (FibrChanl-02), B.11.31.1009, May 7 2010, FCLP_IFC (3,2) |
'IT > HPUX' 카테고리의 다른 글
[HPUX] DNS 서버 설정 (0) | 2017.01.03 |
---|---|
[HPUX] NTP 서버 설정하기 (0) | 2016.12.31 |
댓글